Tough Batteries For Tough Applications
<>
BC1204LFP 12V 3.3A 4 Stage Smart LiFePO4 Battery Charger / Maintainer

BC1204LFP 12V 3.3A 4 Stage Smart LiFePO4 Battery Charger / Maintainer

On sale:$34.99
Free Shipping & 10% Off First Order
Part Number:BC1204LFP
Specifications:
Input Voltage: 110-240VAC, 50-60 Hz
Input Current: 1.1A
Bulk Charge Voltage: 14.4V
Bulk Charge Current: 3.3A
Ripple Current: <0.13A rms
Connector: Insulated Alligator Clamps
Size: 5.91" L x 2.76" W x 2.19" H
Enclosure: Ip54 (Dust protected, water splashing resistance)
Battery Capacity: 7-80Ah
Battery Type: All types of 12V LifePO4 Batteries
Weight: 1.2lb.


How to use:
1. Connect the AC cord to AC outlet. The “power” LED will light on solid.
2. Connect positive charger clip (red) to positive battery terminal, the black clip to negative. The “25%~100%” LEDs will light in a sequence. If the batteries polarity is reversed or output is shorted, all LEDs will flash simultaneously, DISCONNECT & CHECK.
3. Depending on the charged capacity, 25%~100% LEDs will light up solid. When all are ON, the battery is fully charged. You can disconnect the battery to use OR keep it connected to charge in float mode. If battery stays at Stage 2 after 24 hours of charging, then the battery is defective.

BC1204LFP Manual
SaveSaveSave

Reward Points

350 points will be rewarded to you when you buy this item.

Accessories

VMAX 4S Chargers Case
$11.99
Free Shipping & 10% Off First Order
IC4AL Vlynx Charge LEAD W/ Insulated Alligatror Clamps
$12.99
Free Shipping & 10% Off First Order
IC4RT Vlynx Charge LEAD W/ 5/16
$9.99
Free Shipping & 10% Off First Order
IC4XF Vlynx Charge LEAD W/ 3 Pin XLR Female Connector
$12.99
Free Shipping & 10% Off First Order
IC4XM Vlynx Charge LEAD W/ 3 Pin XLR Male Connector
$12.99
Free Shipping & 10% Off First Order

Recently Viewed Items